Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Dowel and spool coffee table

Winnie10
New Contributor
Winnie10
Winnie10
New Contributor

Made from an old cable spool and featuring half-round dowels, this coffee table is both stylish and functional. 

 

 

EDF94CC0-C12D-4A9D-BB3C-7450A74F7558.jpeg

 

The project

 

I made this coffee table out of a wooden cable spool and large half-rounded dowels. I took out the metal rods and cut out pieces of wood to fill the holes. I also cut a section out of the middle of the spool because it was too tall for a coffee table.

 

I used Selleys Liquid Nails Heavy Duty for the middle insert of the spool to hold it in place top and bottom, then added brackets on both ends inside for a firm hold. I applied the dowels using Liquid Nails as well.

 

B2836EBD-F111-4F52-9065-554D76794E54.jpeg

 

There was a lot of sanding wood filler (to where I gained muscles!) as I had to use a nailer to hammer all the staples in. I also used wood filler around the top of the dowels as the spool is not perfectly round.

 

Tip: Get the first dowel straight and it’s all good from there.

 

It was a lot of work but I’m so happy with how it turned out.

631F153C-00E3-491C-A1EA-E187E188589C.jpeg

More furniture inspiration for your home

 

Check out our Top 10 most popular indoor furniture projects for more great ideas and let us know if you need a hand with your own project. We're here to help.

 

Comments
mirandarama
Newbie

Hi Winnie! Just wondering how much you ended up spending on this project? Was just looking into making something like this but if my calculations are correct it becomes quite expensive, almost worth just buying one made?! Or have I calculated wrong?

 

Thanks!

Miranda

Benskimo
Established Contributor

Nice one! That's a great use of something destined for landfill to be the bulk of the construction. How did you cut the dowels in half? 

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @mirandarama. It's brilliant to have you join us, and many thanks for your question about this wonderful project.

 

Let me mention @Winnie10, so they are alerted to your question. 

 

By my calculations, a project like this would be a considerable price. However, having a brief look at this table style, they range anywhere from $600 - $3500. $400 worth of materials doesn't sound too bad, and knowing you made it yourself is priceless.

 

We're keen to hear all about the projects that you have going on around your house and garden. Please let us know anytime you need assistance or have something to share.


Mitchell
 

Jason
Community Manager
Community Manager

Hi @Benskimo,

 

Thanks for your question. Let me tag @Winnie10 so she is alerted to your question of how to cut the dowels in half.  I'm sure @EricL will also be happy to share his thoughts about how he would cut them.

 

Jason

 

EricL
Bunnings Team Member
Bunnings Team Member

Hello @Benskimo

 

The dowels can be purchased already cut in half. If you look at the Porta Half Round Moulding you'll see that it comes in different sizes ready to go. You could reduce the cost of the project by cutting the table down to a smaller diameter. This means that you won't have to use as many dowels. 

 

Another method to re-create this look is by using pine panels and a few timber pieces secured to the centre to create the top and the bottom of the table. If you decide to give this project a go, any updates you can provide would be much appreciated.

 

If you need further assistance, please us know.

 

Eric

 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects