How to hang a bike on brick wall?

[ozymate]

Hi 
I am trying to install a wall-mounted bike rack using 10 mm drilled holes and sleeve anchors, but the top bolts are pulling out of the brick while the bottom ones are holding fine. What would be the best option here?

Any advice on the best fix for this type of load?

[EricL]

Hello @ozymate 

I propose bringing one of the loose bolts with you sleeve included and compare it to a similar sized Dynabolt. Once you find one that is of the same size and length, I recommend replacing all four bolts with Dynabolts. Another option is to use Ramset Ankascrew's and the third option would be to use Ramset 300ml Chemset UltraFix Plus in combination with Ramset M10 x 130mm Galvanised Chemset Stud - 10 Box and Ramset Multifit Sieve. The last option would be the strongest fixing you can install.

Here is a handy step-by-step guide: Ramset™ UltraFix PLUS Polyester Anchoring Kit

If you need further assistance, please let us know.

Eric