Multi-functional, flip-top workbench

[DIY4Knuckleheds]

Mitre Saw, Table Saw, Flip-Top Workbench

My old workbench, as good as it's been over the past 12 years needed a revamp which was the inspiration for this project. I wanted a workbench that incorporated a table saw as well as a mitre saw with the ability for the mitre saw to be flipped and stored underneath the bench when not in use which frees up space on top of the workbench. All materials apart from the wheels were  purchased from Bunnings.

Materials

• 90mm x 35mm MGP10 Pine: https://www.bunnings.com.au/90-x-35mm-framing-mgp10-untreated-pine-2-7m_p8030057
• 17mm Formply: https://www.bunnings.com.au/ecoply-2400-x-1200-x-17mm-f14-formrite-formply_p0390072
• Heavy Duty Drawer Slides: https://www.bunnings.com.au/goliath-heavy-duty-drawer-slide-pair-500mm_p4020990
• 90mm Cup Head Bolts: https://www.bunnings.com.au/zenith-m10-x-90mm-hot-dip-galvanised-cup-head-bolts-nuts_p2443937
• Wheels: https://www.richmondau.com/product/workbench-castors-kit-quick-release-mounting-plates-wbc002set/
• 25mm x 25mm angle brackets: https://www.bunnings.com.au/zenith-25mm-stainless-steel-angle-bracket-4-pack_p3961881
• 42 x 19 DAR Pine: https://www.bunnings.com.au/42-x-19mm-1-8m-dar-pine-premium-1-8m_p8401457

Tools

Dewalt Table Saw: https://www.bunnings.com.au/dewalt-254mm-2000w-corded-table-saw-dwe7491-xe_p0274900

Dewalt Mitre Saw: https://www.bunnings.com.au/dewalt-305mm-1675w-dual-bevel-slide-compound-mitre-saw-dws780-xe_p049740...

Makita Circular Saw: https://www.bunnings.com.au/makita-185mm-7-1-4-circular-saw-5007nk_p6320431

Makita Cordless Drill: https://www.bunnings.com.au/makita-18v-brushless-hammer-driver-drill-kit-dhp484sfe_p6240427

Makita Jig Saw: https://www.bunnings.com.au/makita-450w-d-handle-jigsaw-4329_p6240425

Macsim Clever Tool:

Irwin Quick Clamps: https://www.bunnings.com.au/irwin-300mm-medium-quick-grip-duty-bar-clamp_p5860115

Steps

Step 1

Build the bottom frame:

Step 2

Attach the legs:

Step 3

Attach the top frame to the legs:

Step 4

Build the frame for the table saw:

Step 5

Attach the benchtop:

Step 6

Build the flip top:

Step 7

Here's a couple of photos of the completed bench:

Step 8

Just a quick 15 second clip of the bench in action!

Step 9

Step by Step Video on How to Build the Workbench complete with Plans and Resources:

[JacobZ]

Hi @DIY4Knuckleheds,

I've got to say, I'm envious that I don't have the space for one of my own. 

The attention to detail is remarkable. That little return you put in to conceal the end grain really shows the level of perfection you were striving for with your workbench.

I've seen some pretty impressive workbenches in my time, and this one is right up there with the best.

I am sure it will serve you well and be a part of many fantastic projects in the future.

Thank you for sharing.

Jacob

P.S. Love the dad joke. 

[DIY4Knuckleheds]

Thanks Jacob....glad you liked it mate 👍😁🇦🇺

[Dave-1]

Good afternoon @DIY4Knuckleheds 

Oh man, thats a dream job! "I want one" as soon as I sw the flip top it was "No way!" 

Love the finishing detail and the solidness of the bench. Should have known how well it would be made as soon as I saw the name

Well done and yeah, I would buy that for sure!

Dave

[DIY4Knuckleheds]

Thanks Dave....glad you liked it mate 👍 

[RDBuild]

As a follower of @DIY4Knuckleheds on You Tube & obviously via the Bunnings Workshop Community, love this project of his.  His videos are so good for us basic DIYer's and this is exceptional. And yes, if you haven't followed him on You Tube, then do so, even if its just for the Dad jokes....

[Leon]

@DIY4Knuckleheds 

Hey mate, that is an awesome project and I would love to build it for myself.  Do you have any plans available, and if so, how do I get them??

[JacobZ]

Hi @Leon,

Allow me to tag @DIY4Knuckleheds so he is notified of your question.

You might like to check out his YouTube channel. There might be something there that will answer your question.

Jacob

[DIY4Knuckleheds]

😂......Glad you can tolerate the eye rolling, poorly executed dad jokes mate 😂 Appreciate the feedback too 👍👍

[DIY4Knuckleheds]

I just messaged Leon mate. Thanks for pointing him in the right direction 👍😁