How to use Ecogrub 3 in 1?

[TWan]

Hi I'm using the Ecogrub 3 in1 spray and following directions on how to attach the hose. i've been spraying but the product doesn't seem to be coming through and the bottle is still full

[MitchellMc]

Welcome to the Bunnings Workshop community @TWan. It's marvellous to have you join us, and many thanks for your question about applying sprays.

Let's run through the steps to ensure everything is set up correctly.

Have you removed the tool and punctured the two holes (A and B) on the top of the container nozzle? When you are ready to spray the product, you must cover hole C or return the tool to its original position. If you haven't punctured the two holes or covered hole C, no product will come out of the container. 

If you've followed the steps correctly and no product is being sprayed, then it could be a faulty bottle and I would recommend you return it to the store of purchas to be swapped over.

Please let me know if you have any questions.

Mitchell
 

[TWan]

Hi Mitchell,

Thank you for your prompt reply. Mine looks different you what's attached. Please have a look at my photos.

[MitchellMc]

Hi @TWan,

That style bottle should be as easy as connecting your hose, lifting the flap and spraying. Have you turned the hose on to a mid to high pressure? On low, it likely won't distribute the product.  

If it's not working, I suspect the straw that draws the liquid up to the nozzle has disconnected inside the bottle. You could remove the nozzle and check, but the straw is likely lost within the liquid in the bottle. I notice you have another bottle there. Did that one work?

You might like to return the products and have our team check in-store to see that the new bottles' internal nozzles are in place.

I'm sorry for the inconvenience.

Mitchell