Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

How to build a raised garden bed for privacy

prettyliving
Amassing an Audience

Difficulty: Intermediate

Add privacy and hide unsightly views by growing plants in a raised garden bed. The elevated bed shortens the time taken for plants to reach your desired height, making it a functional and stylish feature in your outdoor area.


Here is a guide on how to build a raised garden bed for privacy. You can use the provided measurements or adjust them to suit your space and needs.

 

As this project involves power tools, please follow all safety guidelines provided by manufacturers and use the recommended protective gear, including safety glasses and gloves. 

 

Those looking for an easier project should visit How to build a simple raised garden bed

 

Steps

Step 1

Mark out the raised garden bed.

 

Determine the exact location and size of your bed.

 

Ensure the ground is level and then use marker paint to mark the space where you want your bed.

 

Use pegs to mark where you want to place steel corner and joiner posts to support your bed. These marks will indicate where to dig the post holes.

 

The amount of joiner posts needed will depend on the overall length of your bed.

 

My bed is 6m long. I am using 3m long sleepers cut into 1.5m lengths for the back and front of the bed. I am securing them using six joiner posts in total. For the sides, I am using 1m lengths, so I won't need any joiners. 

 

Step 1.1. Measuring garden bed.png  Step 1.2. Pegging corners .png  Step 1.3. Marking with paint.png

 

 

Step 2

Dig post holes.

 

Use a spade to dig holes for the joiner and corner posts at the marked points. Make sure the depth of the holes is at least one-third of the above-ground height of the posts.

 

I dug 10 post holes in total for my garden bed.

 

Joiner and corner posts are available in several sizes to suit different bed heights.

 

Step 2.1. Digging holes.png  Step 2.2. Holes dug.png

 

 

Step 3

Cut the treated Pine sleepers.

 

Measure and mark the sleepers according to your required measurements using a square. Remember to factor in the corner posts in your measurements. 

 

Now use a circular saw to cut your sleepers to size for the back, front, and side panels. 

 

I am using 14 3m sleepers in total. I cut 12 of these into 1.5m lengths for the front and back of the bed and the remaining two sleepers into 1m lengths for the sides. 

 

Step 3.1. Measuring the timber .png  Step 3.2. Marking the timber.png  Step 3.3. Cutting the timber .png  Step 3.4. Timber garden bed sides cut.png

 

Step 4

Position the posts and the sleepers in place.

 

Insert the joiner and corner posts into the holes. Make sure the corner posts are facing the right way according to the shape of your bed.

Slide all the sleepers into the steel posts. The front and back joiner posts should be spaced 1.5m apart.

 

Step 4.1. Inserting the corner posts .png  Step 4.2. Inserting the sleepers.png  Step 4.3. Inserting joiner post .png  Step 4.4. Inserting back sleepers.png  

 

 

Step 5

Secure the sleepers to the posts.

 

Use a spirit level to check that all your posts and sleepers are level. Adjust accordingly if needed.

 

Hammer in the tops of the posts until they are aligned with the top sleepers.

 

Now use an impact driver to attach the sleepers to the posts. You can use the 5/16 nutsetter to drive in the Tek screws. 

 

Step 5.1. Checking all is level.png  Step 5.2. Hammering in posts .png  Step 5.3. Screwing in sleepers.png

 

 

 

Step 6

Pour the concrete.

 

Prepare the concrete by following instructions on the product label. I used a wheelbarrow when mixing my concrete.

 

Pour the concrete around the posts to prevent prevent future movement. Leave the concrete to dry completely before backfilling with dirt.

 

 Step 6.1. Mixing concrete.png  Step 6.2. Pouring concrete into holes.png

 

 

Step 7

Attach the corflute.

 

Measure sheets of corflute to line the inside of your garden bed. The corflute will help keep soil and water from leaking between the sleepers.

 

Now use a trimming knife to cut the corflute to size. Attach the corflute to the inner walls of the bed using a staple gun.

 

Step 7.1. Cutting the corflute.png  Step 7.2. Attaching the corflute.png

 

Step 8

Fill the raised garden bed.

 

Line the bottom of the garden bed with cardboard or weed mat to prevent grass or weeds growing through.

 

Throw in any twigs, leaves, or organic material available.

 

Now fill the bed with quality garden soil. Once it is filled, level the soil using a rake.

 

Refer to the guide How to fill a raised garden bed for more tips.

 

Step 8.1. Lining base with cardboard.png  Step 8.2. Filling with twigs.png  Step 8.3 Raking surface.png

 

 

Step 9

Choose your preferred plants.

 

For advice on which plants to grow, check out the guide How to choose a hedging plant.

 

Once you have chosen your plants, dig evenly spaced holes in your garden beds. Then insert your plants in the holes.

 

Top the soil with a layer of quality mulch to prevent weeds and improve water retention. Water the plants well.

 

You have now successfully built a raised garden bed that provides privacy.

 

Step 9.1. Spacing out plants.png  Step 9.2. Planting plants.png Step 9.3. Applying mulch.pngStep 9.4. Watering plants.pngStep 9.5. Garden bed complete.png

 

 

Materials

Tools

Images

 

Step 1.1. Measuring garden bed.png  Step 1.2. Pegging corners .png  Step 1.3. Marking with paint.png  Step 2.1. Digging holes.png  Step 2.2. Holes dug.png  Step 3.1. Measuring the timber .png  Step 3.2. Marking the timber.png  Step 3.3. Cutting the timber .png  Step 3.4. Timber garden bed sides cut.png  Step 4.1. Inserting the corner posts .png  Step 4.2. Inserting the sleepers.png  Step 4.3. Inserting joiner post .png  Step 4.4. Inserting back sleepers.png  Step 5.1. Checking all is level.png  Step 5.2. Hammering in posts .png  Step 5.3. Screwing in sleepers.png    Step 6.1. Mixing concrete.png  Step 6.2. Pouring concrete into holes.png  Step 7.1. Cutting the corflute.png  Step 7.2. Attaching the corflute.png  Step 8.1. Lining base with cardboard.png  Step 8.2. Filling with twigs.png  Step 8.3 Raking surface.png  Step 9.1. Spacing out plants.png  Step 9.2. Planting plants.png  Step 9.3. Applying mulch.png  Step 9.4. Watering plants.png  Step 9.5. Garden bed complete.png

2 Replies
Akanksha
Retired Team Member
Retired Team Member

Thank you for sharing those detailed steps, @prettyliving. I'm sure our members will find them handy. 

 

A raised garden bed offers numerous benefits and can be built using several techniques. Those interested can also check out the following step-by-step guides shared by experienced Workshop members:

 

 

For more inspiration, you can also have a look at the Top 10 most popular raised garden beds shared on Workshop. 

 

Let us know if you need any assistance with your raised garden bed project. We'd be happy to help. 

 

Akanksha

 

mich1972
Kind of a Big Deal

Absolutely love this, will be great once they start growing and form a beautiful hedge and block out the neighbours 🌿💚😊

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects