Share
I have purchased a second hand kitchen hutch (first photo) and want to paint the majority of it however I'd like to leave the bench as the natural wood but with a weathered oak colour (second photo is the inspiration, third photo is the colour of my kitchen cupboards I'd like to match it to). How would I achieve this colour as I know pine is quite yellow? I'd like to keep it on the lowest budget if possible.
Welcome to the Bunnings Workshop community @avocatotoast. It's brilliant to have you join us, and many thanks for your question about achieving a weather timber look.
To achieve a weathered oak look on your pine kitchen hutch bench, you'll first need to sand the bench right back to bare timber. This step is important because pine usually has a yellowish tone and likely a protective finish, which can prevent any new paint from adhering properly. Use a coarse sandpaper to start (like 80-grit) to remove the existing coating, then work your way up to a smoother finish (around 180- to 220-grit) for a clean base.
For the rest of the unit that you plan to paint, you don’t need to strip it entirely. Instead, scuff-sand all the painted or coated areas using 240-grit sandpaper. This light sanding will help your primer stick better. Then apply Dulux Max Adhesion Primer, which is specifically designed for hard-to-coat surfaces and saves you from doing a full sand-back. Once primed, you can paint the body of the hutch with a water-based enamel like Dulux Aqua Enamel in your preferred grey tone to match your kitchen cupboards. It’s durable, low odour and easy to clean up with water.
Now, back to the bench: to create the weathered oak effect, you’ll want to use a dry brushing technique. After sanding, take a small amount of your grey paint and lightly dip your brush into it, then wipe most of it off onto a rag or paper towel. You’re aiming for a brush that's nearly dry with just a faint trace of paint. Lightly drag this brush over the surface of the pine bench, building up colour in layers. Avoid applying a solid coat — the idea is to let some of the natural grain show through, which creates that subtle, weathered look. You may need to repeat this process a few times with very light coats until you achieve the desired finish. The key is to work slowly and gradually build the tone to keep the effect natural and textured.
Please let me know if you have any questions.
Mitchell
