I recently completed this kitchen island project base on an Ultimate Storage 42" 7 draw matt black tool trolley. The ideal was to take the concept of the steel tool trolley into the kitchen to provide for extra storage while adding a larger table top in order to allow seating for eating and entertainment. The table top was made from an Interbuild 2200 x 600 x 26mm Acacia solid oiled hardwood panel that I had cut in half at my local Bunnings store. I then cut 4 lamellas off of the length of one of the panels and biscuit joined it onto the other panel to increase its width. With the timber edge of the previous cut exposing the pale raw timber it was impossible to consider matching the oil finish so I was very happy to take the project to the next level by sanding the panel right back to bare timber to allow several washes of Feast Watson Prooftint Oak stain with the final wash mixed with a few drops of rosewood to provide the final red tint that I was ultimately looking for. Following this process I then laid several coats of Feast Watson epoxy resin to seal the whole panel, a process taking a week and then affixing the newly finished panel after removing the original rubberwood top from the cabinet. Lastly, I swapped out the bulky industrial look castors for Move It™ 100mm rubber castors to match the bench height of the existing kitchen as well as providing a smooth and silent roll on the tiles. Adding a couple of stools finishes the look and the results speak for themselves.
Welcome to the Bunnings Workshop community @Karlster69. It's fantastic to have you join us and many thanks for sharing your project.
That's a terrific bit of innovation right there! Our members never cease to amaze me with the uses they find for project panels. Your project is another great example of this.
How do you plan on laying out the draws? I know I'd be reserving one of the shallow draws to have all my kitchen knives laid out ready to use.
Many thanks for sharing your project and we look forward to seeing what else you are working on around your house and garden.
The draws from the top are... cups, glasses and six often used plates (cups & glasses lined up at the back to keep the weight over the castors) RH side - cutlery draw, appliance accessories, pots in the bottom. LH side - kitchen implements, wraps & foils, baking dishes & spring forms in the bottom. Weight distribution was a concern before we filled it so a lot of thought went into the top drawer plus, a bit of tinkering around was needed to get the layout just right. Careful consideration of weight distribution means we won't come close to having a disaster and for anyone doing this please think carefully about weight at the front of the drawers as too much, or too many open at one time will result in the entire cabinet falling forward and hurting someone and we don't want that to happen.
Love it @Karlster69. Congratulations and many thanks for sharing. I have featured this on our Project Gallery and are confident it will inspire many Bunnings Workshop members and visitors alike.
Welcome to the community, we are looking forward to reading more about your projects and plans. Please don't hesitate to post whenever you have something to share or need a hand with a project around the house or garden.
I trust @Karlster69 would be happy to provide guidance if you wanted to complete this project yourself. I'm also available if you need help.
We no longer carry the black version in our stores. I'll make contact with the manufacturer after the weekend so see if it can be special ordered. There is a very attractive Ultimate Storage 56" 10 Drawer Tool Trolley which features a hardwood benchtop and stainless steel body. I wonder if Ultimate Storage saw @Karlster69's project and decided to add something similar to their range?
Please let us know if you need any help or had questions.
I've followed up with our supplier and stores Australia wide will receive the Ultimate Storage 42" Matte Black Tool Trolley in the second week of January next year.
Please let us know if you'd like to complete this project and if you need any assistance. We look forward to seeing what you'll create.