Hi I recently bought and had installed a Tall Vege Spray Mixer for my kitchen sink. Found that there is no pressure for the hot water. When I put it onto cold water the pressure is there however once you turn it to hot water hardly any water comes out. Please help
That must be frustrating @Urania. I hope Workshop members have some suggestions for you.
There was an interesting discussion kicked off by @qeff a couple of months ago about water pressure that you might like to check out - https://www.workshop.com.au/t5/Bathroom-and-Laundry/Flexible-braided-hose-connector-Cause-of-Low-Pre...
Let me also extend a very warm welcome to the Workshop community. We trust you will receive lots of fantastic advice and inspiration for your projects from our members. Feel free to post whenever you need a hand or have something new to share.
We look forward to reading more about your projects and plans.
Check to see if the Flexible Water Connector isnt kinked... BTW, also photos help? hth
Check underneath your sink if your taps attach to a stoptap, like. Valve and make sure they are both turned on. Unscrew the tap head and check for blockages.
Other wise check all your other taps in the house just for hot water pressure and you may have a pressure problem