Hi
We recently used Peel Away to remove layers of paint from our circa 1940 home in the Blue Mountains, and have been left with small dents/scrapes i ...
I have a BIR which is approx. 3000mm wide but only has a hanging rod and nothing else. I would like to create a several shelves and keep some hangin ...
DIY July!
We had been wanting to do wainscoting for a while but were unsure where to start. Thankfully it was so simple with the Bunnings team's hel ...
I bought an Ikonic San Fran Privacy Door handle today and after multiple times of installing it and uninstalling it but it only turns upwards. it stil ...
Hi! I'm looking for advice for mounting a track curtain to a concrete ceiling in my unit. The building is an 80's double-brick construction with concr ...
Hi, newbie here. I am planning to install fly screen to the window in my bedroom. Looking for inspiration, ideas to install the metal fly screens for ...
My wife has bought a full Murphy bed kit, all except for the timber bits. Attached is the overall look of the bed from their Instruction booklet.That ...
Hi
I am planning to use Specrite 2100 x 900 x 30mm timber multiuse pine panel to built bed frame
is it suitable wood to built bed frame as it is fin ...
How can we fix the hole in the floor of our dining room? It started as a crack and now it looks like this! There are bits under neath that are not til ...
Hi, I'm currently in the process of removing carpet and laying down hybrid flooring. I've run into an issue at the top of my staircase, the way the ra ...
Hi all, its me again, separate question from my other posts.
So we've got the heater gas bayonet decomissioned, and needing to get this wall vent cl ...