Hi, Workshop Community
I installed a Ekodeck about 3 years ago. I used the Cameo (hidden) screw method to install them. Unfortuneately after a period of time the boards have started to lift and break away from the screws. Since then Ekodeck has redesigned these boards and introduced a clipping device.
I am in the process of screwing down these boards now, does not look as good as the hidden screw look but it is holding the boards in place.
As mentioned, water (after cleaning and rain) will leave makes if not wiped away. My only real complaint is that the boards after time never really look clean. Any advice on cleaning would be apprecited, I usually use my Gerni deck cleaner attachement, even this leaves residual marks.
