Share
Hi everyone,
I’d love to build a metal planter with a trellis (like in the picture), but I’m a total beginner and have no idea where to start.
Could anyone please suggest:
- The materials I’ll need (ideally from Bunnings)
- Simple step-by-step instructions
I’d like it to be full metal, sturdy, and not too complicated for a first-time DIYer.
Any advice would mean a lot — thanks!
Hello @Accomplished_B
Is this a Bunnings product? If you have seen it on the Bunnings website, please let me know where you found it by using a link or a product number so that I can track it down for you.
If it is not a Bunnings product, it is possible to emulate the look by using a Northcote Pottery 98cm Grey Savannah Planter and a Jack Matrix 1800 x 900 x 6mm Smooth Cream Reeded Square Lattice along with a Jack Matrix 1815 x 915 x 28mm Charcoal C-Channel Frame Kit. The frame of the Matrix panel will need to be screwed onto the planter's body or frame.
The store does not carry pre-pressed steel panels to build this from scratch. However, you can build it from timber, I suggest having a look at this featured discussion - Hardwood and mesh trellis with planter boxes by @DIY4Knuckleheds.
If you need further assistance, please let us know.
Eric
