Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

How to cut Everhard Easydrain compact galvanised?

Sebastian90
Growing in Experience

How to cut Everhard Easydrain compact galvanised?

Hello!

I have the Everhard Easydrain compact galvanised 1000mm, but need to cut it down to 900mm. Is this possible? I can only seem to find information on how to cut and join to other sections, which all indicate cutting at the ribs, which are located 200mm from each end. This would make it too short.

Any suggestions?

Thank you!

JacobZ
Bunnings Team Member
Bunnings Team Member

Re: Cutting down the Everhard Easydrain compact galvanised

Hi @Sebastian90,

 

Thank you for your question about cutting down drainage channels.

 

If you are not joining the channel to anything else, you do not need to cut between the ribs. These ribs are there to slot into an Everhard EasyDRAIN Converter.

You would simply cut the drain and grate to length, then use silicone to attach an Everhard EasyDRAIN Compact End Cap to your drainage channel.

Let me know if you have any further questions.

 

Jacob

 

Sebastian90
Growing in Experience

Re: Cutting down the Everhard Easydrain compact galvanised

Thank you!

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects