Child Item

How to remove paint from outdoor glazed tile?

Hi everyone, the previous owners of our house painted the front (outdoor) verandah tile using Dulux Renovation Range Floor (interior) tile paint with satin finish.

How might I remove the paint from this type of outdoor tile? I would love to restore them to their former glory!

I've attached images of the front verandah where the paint is chipping, as well as some tiles that weren't painted.

Thank you 🙂

Find more posts tagged with

Repairing

Renovation

Tiling

Cleaning

Painting

Comments

Dave-1

Afternoon @smiller

Perfect weekend t have a stroll through the community pages 🙂 Welcome!

I would sugget a high pressure water blaster and taking your time over it. The paint is lifting alrady so hopefully you can remove the rest. Keeping the glaze on the old school tiles is my main concern so I wouldnt be using a iwre brush or drill attachment.

Note

Saftey Googles!

Paint flecks will go everywhere! I am yet to figure out how to do an area and keep it all in one space 🙂 Just did my patio and also the wall next to my pool. It works but the mess afterwards is something to factor in.

Dave

MitchellMc

Welcome to the Bunnings Workshop community @smiller. It's brilliant to have you join us, and many thanks for your question about removing paint from tiles.

As @Dave-1 mentioned, I'd recommend first blasting as much paint off as possible, and you want to stay away from anything abrasive. You could try some paint stripper on a small test area to see if that will easily lift the paint. Unfortunately, it will be a messy business, so please wear PPE, including a long-sleeved shirt and trousers, a facemask, eye protection, and rubber gloves.

Please let me know if you have any questions.

Mitchell

smiller

https://www.workshop.bunnings.com.au/discussion/comment/35780#Comment_35780

Thank you for your suggestion, Dave! Have just given the pressure washer a try (wearing all appropriate PPE of course!) and it's working quite well. There's a few tiles where not all of the paint is lifting with the washer alone, so may try some paint stripper later on as Mitchell suggested.

Paint flecks definitely do go everywhere! Worth it for the end result in my opinion 🙂

Dave-1

https://www.workshop.bunnings.com.au/discussion/comment/80155#Comment_80155

🙂 @smiller

Pretty much what I ended up deciding for the wall next to my pool 🙂 Worth it!

With the paint stripper, maybe try it on an out of the way tile just in case first. Just to check if it wants to etech the surface )most prob wont) but err on the side of caution.

Dave

aarontec

Hi, I've got a similar situation to this. Just wondering what kind of high pressure water blaster did you use?

Thanks!

EricL

https://www.workshop.bunnings.com.au/discussion/comment/42270#Comment_42270

Hello @aarontec

Welcome to the Bunnings Workshop community. It's sensational to have you join us.

Let me tag @smiller to make them aware of your question. There are quite a few brands to choose from, my best advice is to make sure the unit you purchase meets the minimum required water pressure of 2030PSI.

If you have any other questions we can help with, please let us know.

Eric

smiller

https://www.workshop.bunnings.com.au/discussion/comment/42270#Comment_42270

Hi @aarontec and thanks @EricL for looping me in!

I used the Full Boar 3200 PSI pressure washer on my tiles. It worked a treat for the most part, but there were some areas where the paint wouldn't budge. Here, I used Poly paint stripper. I left the stripper on for no more than a couple minutes and the paint came off quite easily. Back-breaking work, though!

Thanks,

Sophie

Child Item