Hi @Phil8303 we used 70x45 timber for the frame spaced out every 600mm verticality, that was direct stick on to the brick for the cladding to stick on. Then we used our paslode finishing nailer for the cladding so you won’t see the nails, until you are sort of pretty much close to it. Thanks for looking.
Hi team
Looking to build some bench seats for a fire pit area and like the look of loose rocks under the seat. Similar to the pic below but with a b ...
Every outdoor entertaining area needs a kitchenette.
This design is all Sarah's!
We've used treated pine to build the frame so it lasts better in c ...
