Child Item

What type of sander to use for diy projects?

Hi there, I am looking to do some DIY projects. This includes sanding the existing skirting before re applying the paint, sanding a buffet table and dining table top, edges.

Please recommended what type of sander will be appropriate for these little projects.

Thanks

Find more posts tagged with

Tools and Materials

Furniture

Recycling and Upcycling

Comments

AlanM52

Hi sud,

Buy a 1/3 sander.

Ozito 150W 1-3 Sheet Finishing Sander.jpg

Plus some packs of sandpaper.

Punched Sand Sheets.jpg

Like 80 and 120 grit.

Use regular sandpaper for the skirting boards.

Assorted Sanding Sheets.jpg

I usually fold and tear a sheet in half then fold them again which is a good size for hand sanding or to use with a sanding block.

Cheers

JacobZ

Hi @sud,

@AlanM52 has already provided some excellent advice. A 1/3 sheet sander would be great for all of these projects.

A random orbital sander would also work well, but with them usually being round, they struggle in corners.

You might like to check out How To Choose A Sander for some further information and guidance.

Let me know what you think and if you have further questions, please don't hesitate to ask.

Jacob

sud

https://www.workshop.bunnings.com.au/discussion/comment/53366#Comment_53366

Thanks for your response. Would a 1/3 sander be appropriate for sanding this entry door? Please see the attached picture

EricL

https://www.workshop.bunnings.com.au/discussion/comment/89251#Comment_89251

Hello @sud

Yes, a 1/3 sander will work on the flat surfaces of your door. However, I recommend using a Josco 100mm Purple Multi Strip Disc or a Craftright 3 Piece Sanding Flap Wheel Set to get into the tight corners of your door. My best advice is to make sure not to use too much force to grind the deep corners of the door surface.

If you need further assistance, please let us know.

Eric

Child Item