minhletn

Ask a question

since

December

Growing in Experience

Total posts 19
Total likes 5
Joined 09 November 2022

My latest posts
Posts I liked
My liked posts

Growing in Experience

1 reply

Hi @MitchellMc, @EricL I just wanted to share the finished products, 2 plant stands made of Merbau and Cypress, 2 coats of decking oil Thanks ...

Growing in Experience

2 replies

Hi @MitchellMc, I did end up with this after spending some time with the Bunnings team at the Special Order desk in two different stores. They did t ...

Growing in Experience

4 replies

Getting Cypress DAR seems to be a challenge as it’s a special order item and the minimum quantity to order is 200 

Growing in Experience

6 replies

Hi @EricL, I’m back with more question Can I use Merbau for the frame and Cypress https://www.bunnings.com.au/68-x-19mm-2-4m-screening-cypress-dar_p ...

Growing in Experience

7 replies

Thanks for the explanation @EricL, It says on the website “SpecRite's pre-oiled decking is ready for finishing on-site with your preferred topcoatin ...

Growing in Experience

9 replies

Thank @EricL, Am I right to assume that can I just coat the pre-oiled Merbau timber with decking oil without having to use Timber Prep/Cleaner first?

Growing in Experience

11 replies

Thank you @MitchellMc , I’ve ordered Merbau for this With it having been primed already with timber oil, can I just coat it with decking oil or do I ...

Growing in Experience

1 reply

Hi @EricL, It’s done. I made the supporting frame using DAR Tasmanian oak, with more pieces like you suggested, and covered the edge of the particl ...

Bunnings Team Member

12 replies

Hi @minhletn, You could use Tasmanian Oak, though keep in mind it’s a relatively soft hardwood and may not hold up as well outdoors compared to other ...

Bunnings Team Member

Hi @minhletn, If you're going for that floodlight, you'll need to mount it where the panel receives direct sunlight. The floodlight you've chosen is ...

Retired Team Member

Hi @minhletn, and welcome to the Bunnings Workshop community. We're glad to have you join us. I wonder if you could use Velcro tape or Velcro dots o ...

Bunnings Team Member

Hello @minhletn It's great that you've received excellent advice from @BradN. Using velcro dots is a great way to keep the shelf from being pulled o ...

Becoming a Leader

I recently put together a better quality flat pack for my daughter. The shelf pins had a small stud that went into an indent in the bottom of the shel ...

Growing in Experience

1 reply

Hi @MitchellMc, @EricL I just wanted to share the finished products, 2 plant stands made of Merbau and Cypress, 2 coats of decking oil Thanks ...

Growing in Experience

2 replies

Hi @MitchellMc, I did end up with this after spending some time with the Bunnings team at the Special Order desk in two different stores. They did t ...

Growing in Experience

7 replies

Thanks for the explanation @EricL, It says on the website “SpecRite's pre-oiled decking is ready for finishing on-site with your preferred topcoatin ...

Growing in Experience

1 reply

Hi @EricL, It’s done. I made the supporting frame using DAR Tasmanian oak, with more pieces like you suggested, and covered the edge of the particl ...

minhletn's Bookmarks

Go to Bunnings

Online Status	Offline
Date Last Visited	December

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Add shelf support

Re: Timber for outdoor plants stand

Re: how to mount solar light under the gutter

Re: How to fix shelf in place?

Re: How to fix shelf in place?

Re: How to fix shelf in place?

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Timber for outdoor plants stand

Re: Add shelf support

User's latest posts

Posts user liked

User's liked posts