Thanks @MitchellMc. I made sure to tighten everything up separately, with the spindles well tightened before putting on the locking nuts, but unfortun ...
Thanks @MitchellMc. I cleaned everything up really well, but still get leaking, and the locking nuts still wouldn’t fully tighten. I put in 28mm spind ...
@MitchellMc update - I went ahead and tried cutting back the black stuff a bit, sadly didn't fix the issue at all. The only other thing I can think of ...
Thanks @MitchellMc. See pics below - it's a bit hard to see what's going on; I've upped the brightness to try to see the black stuff better. On the co ...
Hi @MitchellMc, thanks for the advice. Unfortunately I've already done all of those things! I installed several times, ensuring to seat the spindle fi ...
Hi @EricL, thanks for your help. I finally got round to fixing the taps and wound up having to replace the tapware altogether (installed Mondella Chro ...
Unless I turn the shower handles off extremely hard, the showerhead drips. I'd like to fix this so the shower handles can just be turned off normally ...
Hello @kayara
The jumper valves inside your tapware have worn out which is why your shower head is leaking, and the taps are difficult to shut off. ...
Hello @kayara
Looking at the picture you posted, it appears that the thread on spindle is still in good condition and its possible that the nut for ...
Hi @kayara,
When your hedge is still establishing, the best approach is to encourage branching rather than just trimming the surface. You can do thi ...
Hi there, novice gardener here! I planted a Lilly Pilly Resilience hedge 1.5-2 years ago from tube stock. They're about 5 feet tall now and I'm concer ...
