Hi all,
The white PVC front edge trim on our long bathroom shelf has started to peel. From the left, the first section is still firmly attached, the ...
From the photo below, I bought two packs that are larger than the standard 5mm and for better security but they are too big to fit into the hole.
I ...
Hi all
Would anyone know what would be the quickest and easiest way to fix / install new shelf pins for a wardrobe? One of the shelf pins keeps pop ...
Hi Eric,
I might buy some sandpaper around 100-120 grit just in case it doesn't smooth out. Thanks for the advice and recommendations. I'll take a loo ...
Hello @Jay_11
When you remove the old aerator from the basin mixer if you reach inside the spout, you might find the old flat O ring stuck in there ...
Hello @Jay_11
I suggest having a look at the FIX-A-TAP WELS 5 Star 6L/min 13mm 1/2" Male Swivel Aerator. It's a generic aerator often used for both ...
Hello @Jay_11
I suggest looking at the Kinetic 15mm x 20mm Rise Cover Plate or the Kinetic 3/4" BSP 15mm Rise Cover Plate. There are other sizes, s ...
Hi @Jay_11,
The wall bracket should typically have enough thread to allow several rotations onto the male wall fitting, ensuring a secure and flush ...
Hi Eric,
I might buy some sandpaper around 100-120 grit just in case it doesn't smooth out. Thanks for the advice and recommendations. I'll take a loo ...
I bought this one today https://www.bunnings.com.au/fix-a-tap-wels-5-star-6l-min-13mm-1-2-male-swivel-aerator_p0027412 and installed it without any is ...
Ok thanks, Eric.
I believe the O ring was stuck to the Aerator when I unscrewed it. What prompted me to remove the old Aerator was due to two meshes f ...
Thanks, Eric! I'll measure it up and end up buying either of those cover plates.
The only other option I can think about solving this is finding ano ...
Hi Mitchell,Yep that's what I was thinking about the latch assembly could be adjusted. Just the door hinges are my main issue and would like to remove ...
