Hello @gabofonseca
This link may help:
https://smarthp.co.nz/wp-content/uploads/2019/12/Motorised-Instruction-Print-v.3.pdf
Note:
It does not appear ...
I take no responsibility for this suggestion BUT . . .
You could use a Tuya WiFi Smart DIN Rail Mounted Miniature Circuit Breaker from AliExpress.They ...
Hi @stevesmith2107
Is this the sort of Grid Connect remote control you are after?
If so, please refer to Page 12 of this Forum: "4 Gang Smart Switch ...
Hello @w0mbat
For a start, at 71 years old, I'm not far behind you.
As I didn't know what would happen if the control logic within an automation exce ...
Hi wOmbatYour logic all looks good to me. In you particular case, you are cunningly turning the BTHubSwitch power ON and OFF in the body of your Autom ...
CHECKING THE CURRENT STATE OF A SMART SWITCH:
wOmbat's post reminded me of a trick to test the ‘ON/OFF’ state of a Smart Switch (SW1).
Grid Connect's ...
Grid Connect Notifications:
For the first time the other night, I had a quick look at Grid Connect 'Notifications'.
I wrote down a few operational not ...
Thank you soooo much for your contribution @GreenHouse this was precisely what I was looking for. I have fixed the issue and my blinds are working bea ...
@daveh1224 usually it's a 2.4/5ghz issue.
If you can place your modem into 2.4ghz only or setup a guest network with 2.4ghz only and try connecting ...
Wondering if arlec security cameras can only be used on/with grid connect app,,,,I have 2 cameras that will not connect,,,, tried way too many times n ...
@chrisduffield79 @MitchellMc
Hey Chris,
Your hot water system will be connected at 15amp CB as 3.6kw / 240v = 15a so you have a couple of choices and ...
Hi all,Just after a bit of advice.Context: I've started using the GridConnect system for a few things around the house—smart light switches and power ...
@w0mbat
Tuya / Grid Connect Smart Devices and 2.4GHz Wi-Fi Requirement
Why 2.4GHz is Required for Initial Setup (Not 5GHz or Dual-Band)
Hardware and ...
Hi Tinmann,
I am afraid it is a little more complicated than has been suggested. For a start. the IP address of the range extenders will have to be in ...
Hello @gabofonseca
This link may help:
https://smarthp.co.nz/wp-content/uploads/2019/12/Motorised-Instruction-Print-v.3.pdf
Note:
It does not appear ...
Hi @stevesmith2107
Is this the sort of Grid Connect remote control you are after?
If so, please refer to Page 12 of this Forum: "4 Gang Smart Switch ...
Hi wOmbatYour logic all looks good to me. In you particular case, you are cunningly turning the BTHubSwitch power ON and OFF in the body of your Autom ...
CHECKING THE CURRENT STATE OF A SMART SWITCH:
wOmbat's post reminded me of a trick to test the ‘ON/OFF’ state of a Smart Switch (SW1).
Grid Connect's ...
Grid Connect Notifications:
For the first time the other night, I had a quick look at Grid Connect 'Notifications'.
I wrote down a few operational not ...
Flood Detector Part 3 of 3
Having decided NOT to use the Tuya Smart Wifi Water Leakage Detectors for their intended purpose, I wondered if they coul ...
Flood Detector Part 1 of 3
Over the last few years, 3 homes adjacent to me have been flooded from burst ‘Stainless Steel Braided Hoses’.As a result, I ...
