I have found my kitchen swivel tap has come loose - top and bottom not moving as one. I have a tube wrench set for tightening the bit under the sin ...
Fluorescent light tubes haven't been changed for years. One failed so I replaced it with a fluoro LED tube. Changed the starter first. Tube doesn't ...
Hi EricHere it is. It’s way more modern than the old one, position adjustable at both ends, and the head has three settings to adjust the water flow. ...
Thanks everyone for your help. I’ve replaced the shower arm, learned a lot, and appreciate this forum. Thanks also to Bunnings and Reece Plumbing Inni ...
Hi. I’ve undone the screw underneath - it is the lock for the wall mount. The shower arm comes apart in the middle, but I suspect it should not. Protr ...
Hi @Rdonair,
I would presume that the fitting left on your wall should unscrew from it, as it's a proprietary fitting for that particular arm. Once ...
Hi @Rdonair
That might be the locking grub screw for the arm when it's connected to the wall. I suggest giving it a test and removing it, if the ar ...
G'day Mitch. @MitchellMc Is that a cover seen at far right of @Rdonair 's top photo.Could it be hiding a locking nut? Any excuse to use the whiteboar ...
Fluorescent light tubes haven't been changed for years. One failed so I replaced it with a fluoro LED tube. Changed the starter first. Tube doesn't ...
Hi EricHere it is. It’s way more modern than the old one, position adjustable at both ends, and the head has three settings to adjust the water flow. ...