I’m trying to replace my laundry tub. I’ve loosened the locking nut under the mixer tap. But to totally remove the tap I either need to get the 2 conn ...
Yes it’s welded directly to the top rail. It juts out about 350-400mm, with no support. If you went any further I think you’d definitely need support. ...
Standard 40ft container
The footings were designed by an engineer, and were about a meter of steel set in concrete and then welded to top rail of con ...
Find a good condition container, transport it to my island, get an engineer to design cyclone-proof footings, get a crane to position it, design inter ...
Hi @Bill55,
The top of the flexi hoses should be attached to the mixer body via a threaded connection, so you should be able to rotate the top of th ...
What a fantastic project @Bill55! I'm sure you are really pleased with the results.
I think this is the first time I've seen a shipping container wi ...
Hi @Bill55
Definitely fungal of some sort. It's "attacking" the nodes as they are potential points of entry/weakness in the trunk. One of those natur ...
Find a good condition container, transport it to my island, get an engineer to design cyclone-proof footings, get a crane to position it, design inter ...