Hi @matzpersson, Your approach seems reasonable and well-thought-out. Leaving a 40-50mm strip of fibre cement at the bottom is a smart idea, as it hel ...

Hi Matz (@matzpersson), 4-5mm on each side will be fine. This will allow for that little bit of expansion that can be easily covered with a gap fill ...

Hello @matzpersson Installing the Weathertex 3660 x 300mm Colonial Smooth Selflok Weatherboard over cement sheet might be possible, but please allo ...

Hi @matzpersson, There is a provision for the Weathertex boards to be installed over a masonry wall. However, 70 x 35mm batons must first be attache ...

Hello @matzpersson Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about fix ...

Morning @matzpersson Welcome to the community Its a good place to wander through and see what can be done. Only down side is it can chew up a lot of ...

Hi @matzpersson before even reading both @EricL and @Dave-1 replies, the first thing to mind is why the need to even connect to the exiting shed? It w ...