Hi @Dave-1,
All the soil has been removed from the outside wall. I can’t really put blinds or awning externally. I have new garden growing with a lo ...
After fully removing all the rubbish, I put strong plastic on the ground and only ran it up the brick footing a little bit. Should I have extended it ...
Wow! That looks great. I put a brick vent in today to try and increase some airflow. I was thinking that stripping down some timbers would probably be ...
The veranda is off the main bedroom and was previously and will be again used as a walk in wardrobe/dressing room. It has always got notoriously cold ...
Thanks. That black plastic is a cheaper solution. I will need to raise the floor by 28-30mm then add the 19mm yellowtongue. It will need to be timber ...
Thanks @MitchellMc. So have I got this right that the thermal layer is attached to the top of the joists directly over the insulation and then the yel ...
Hi @mlewin,
Ideally, the plastic should extend above the damp-proof course. I can't tell where it is from your photo, but if you could cover it, tha ...
Hi @Dave-1,
All the soil has been removed from the outside wall. I can’t really put blinds or awning externally. I have new garden growing with a lo ...
After fully removing all the rubbish, I put strong plastic on the ground and only ran it up the brick footing a little bit. Should I have extended it ...
Wow! That looks great. I put a brick vent in today to try and increase some airflow. I was thinking that stripping down some timbers would probably be ...
The veranda is off the main bedroom and was previously and will be again used as a walk in wardrobe/dressing room. It has always got notoriously cold ...
Thanks. That black plastic is a cheaper solution. I will need to raise the floor by 28-30mm then add the 19mm yellowtongue. It will need to be timber ...
