The doors that were replaced were back doors. They are hollow core external doors.
The builder is the one who said it’s because of the sun. My painte ...
Yes the sample pot was to just touch up those areas and is what the builder told me he used.
the doors are bowing quite a lot, it’s worse in the afte ...
I recently had a construction company replace two of my external doors. The door bow towards the external of the hours at the bottom and are pressing ...
Just thought I would update on how this repair went.
I chose to use PC-11 marine epoxy paste for the repair because it is water resistant.
I firstly ...
My shower screen has rubber underneath between the metal and tiles. I previously used clear silicone that was not for wet areas and it turned orange o ...
Thanks for sharing the extra photos @SelinaKyle. A good option here would be to cover the yellowed section with a PVC quad moulding. To get the best r ...
Hi @SelinaKyle,
Unfortunately, there isn’t a specific product I’m aware of that you can apply over the rubber to stop it from leaching chemicals int ...
Hi @SelinaKyle,
Realistically, you shouldn't be using a filler product in a wet area at all, but I suppose the PC-11 56g White Epoxy Paste would be ...
Hi @SelinaKyle,
Where exactly in the bathroom are these holes? Are they in a direct wet area, such as your shower enclosure or in a splashback behin ...
The doors that were replaced were back doors. They are hollow core external doors.
The builder is the one who said it’s because of the sun. My painte ...
Just thought I would update on how this repair went.
I chose to use PC-11 marine epoxy paste for the repair because it is water resistant.
I firstly ...
The last photo is of the bracket that is still attached. The pin head is gone on the bracket that came off, the pin is still there. Any help to know ...