@ajperry Depending on your DIY confidence and the roof cover, there is a way to be sure this doesn't move for decades but it takes a lot of messing ...

@ajperry The chemset anchors work the opposite way round. You set a threaded rod type fixing into the wall with the chemset let them dry then put t ...

Hi @ajperry Have you seen this guide.... https://hebel.com.au/wp-content/uploads/downloads/Fixing-to-Hebel-Guide_HELIT225.pdf

@dannyp Ok so my 2c worth is the loading on your ceiling What additional weight will you be adding into the ceiling if you have both and should it ...

Hi @bennib0i Well the phone cable appears to already be cut so that takes us out of the need for a registered cabler (not that I think you would ha ...

Hi @David4321 Unfortunately that is not a gas lamp and likely never was. There is no valve for turning it off and on and the big giveaway is the el ...

hi @rusty26 The problem you have is that in order to remove the skirting boards, you will need to pry them off the walls and I seriously doubt you ...

@otnimus1 Not if you were thinking of using it to fix the brickwork. The current brickwork is compromised and as such should be fixed properly consid ...