Hi @aton5, The simplest solution to the problem is to simply take the door off the hinges and use a block plane or planer to remove 4-5mm from the t ...

Hi @aton5, As a general rule, you shouldn't install them within 100mm of each other because it can cause the plasterboard between them to fracture. ...

Hi @aton5 Those screw-in anchors are probably the last type I would use. They are ok for fastening static objects where nothing moves. Because eve ...

Thinking about it @aton5, if the door locks when the striker plate is removed, then it's likely the plate itself that is the issue, not that timber. R ...

Hi @aton5., Clamp the striker plate in a bench vice and file down the edge that is binding. You could also if needed shim the top hinge with cardboa ...

Hi @aton5 The image of the studs I supplied was simply a common layout, so don't be worried about your builder being shonky. To have studs in diffe ...

Hi @aton5 Just note that one of the biggest differences between price-points of stud-finders is how deep they can scan through various sub-straight ...

Hi @aton5, If it's this Ryobi Stud Finder With AC Detection RYSF5003, it appears to use a green LED to indicate a solid object. It uses the red LED ...