Hi @EricL
A question on your suggestion. You said to include small angle brackets on the floor so it does not move. As per pic it looks like the lo ...
Hi @EricL This is for a different area. Sorry i think i did not explain it right What i am asking is i have a benchtop which has a cutout of 460 mm a ...
Hi @EricL Can you suggest the best Tiber blade jigsaw to cut ? Also use the same silicone at the bottom of waterfall or different ? And what is wante ...
Hi @Savya01,
If the waterfall piece sits on top of the bracket, then yes, it will sit up off the ground by whatever the thickness of the angle brack ...
Good Afternoon @Savya01
Without removing all the things on your shelves it is a bit hard to see what steps to start with but will hazard a guess.
Jus ...
Hello @Savya01
Just a friendly reminder that any plumbing work that needs to be carried out must be done by a licensed plumber for safety and compl ...
Hello @Savya01
In order to remove the shelves in your walk-in pantry, I suggest removing all the items on the shelves and examining the surface ver ...
Hello @Savya01
Thank you for the clarification. If the sink is 500mm deep it might require the cut out to be bigger. Especially if the cut out is o ...
Hi I want to remove the bottom two shelves from the pantry. you can see there are 4 shelves. i just want to remove the bottom 2. How can i do so ? I a ...
great thanks @Dave-1 @JacobZ i guess i will go with timber in stone with glue. i don't want to spend too much as of now and i assume to remove the st ...
Hi @Dave-1 Thanks fir that? Sorry. I could not understand your second answer. can you explain that in detail ? are you saying joiner is for both the ...
Hi @EricL , Three questions on your response 1) Cover the front with another piece ? I assume this is that small bar at the front ? Also why is that ...
