Hi @Nailbag et al,I'm about to start the project and need one more thing.Is the orange spaghetti two pieces joined together as Beowulf Builders did in ...
Hi @Nailbag, Thanks for your suggestions, I don't have a good experience with Dyna-bolts and might stay away from them, I might go with the ankascrew- ...
Thanks for that @Dave-1,Is there a reason you are doing the paneling in two sections instead of one? The reason they are in two frames is due to the e ...
Hello,
Need some advice with the fixing of the stud to the brick wall.
Brief: Living room, two brick piers with a brick wall and shelf on top with a v ...
Hi @Six7
If you've had bad experiences with Dyna-bolts (we all have) it's typically because the hole is too large, shallow (hit a hollow) or soft ( ...
Hello @Six7
My best advice would be to double check your mounting points on the brick face to make sure you miss the mortar joints. A good visual c ...
Good morning @Six7
I would attach your vertical timbers for your frame with masonary screws Ramset 10 x 75mm Galvanised AnkaScrew Masonry Anchor
Mak ...
Hi @Six7
You could use 100mm x 10mm Dyna-bolts or Orange spaghetti and 100mm batten/bugle screws, which is usually how I would fix the battens to a ...
Thanks for that @Dave-1,Is there a reason you are doing the paneling in two sections instead of one? The reason they are in two frames is due to the e ...
Hello,
Need some advice with the fixing of the stud to the brick wall.
Brief: Living room, two brick piers with a brick wall and shelf on top with a v ...
