How to fit furniture legs to buffet?

Question

Hi, I have bought the adorned round legs for a buffet fixup, but I can't work out how to fit them… Do I need to fix a block for each leg, and then how do I fit the legs to the.blocls - do I need a plate also?

Pictured are the legs, and the buffet is pictured on its side looking at the base.

Noyade · Answer

Hi @Lizbeth1

I highly recommend the plates @EricL mentioned. They have amazing strength despite a low clearance.

EricL · Answer

Hello @Lizbeth1

Thank you for sharing your question about installing adorned round legs to your buffet table. If it is a fresh install, you'll need to use either the

https://www.bunnings.com.au/adoored-3-8-vertical-leg-plate-2-pack_p0101571

or the

https://www.bunnings.com.au/adoored-3-8-t-nut-leg-furniture-4-pack_p0101567

to complete the setdwcs. The leg plate as seen in the images are screwed onto the bottom of the cabinet. It will be necessary to drill pilot holes for the threaded post of the legs so that it does not hit the cabinet and you can screw it all the way in. The same installation step is applied to the "T Nuts" a large pilot hole will need to be drilled into the cabinet to prevent the threaded post from hitting the cabinet. The other option is to cut the threaded post as seen in the guide below.

Here is a handy step-by-step guide: Adoored Vertical Leg Plates Video How To Install

If you have any other questions we can help with, please let us know.

Eric