nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

How to match bike stand parts?

477bus

hi, I’m missing the fixing parts from a bike stand. I recently imported from I asked them to send me the parts but is send me these part details.

Can you advise if you can match them in the Maroochydore store please?

M10x22 zinc-plated socket head cap screw with Loctite

Ø10 zinc-plated spring lock washer (Grower washer)

Cheers!

Find more posts tagged with

Tools and Materials

Craft and Hobbies

Repairing

Accepted answers

All comments

EricL

Hello @477bus

Thank you for sharing your question about your bike stand. The closest items I can suggest would be the Pinnacle M10 x 30mm Stainless Steel Hex Head Bolts And Nuts - 2 Pack and the https://www.bunnings.com.au/zenith-m10-stainless-steel-flat-washer-each_p2430052 along with the Zenith M12 Stainless Steel Round Flat Washer which you can use to double up if you need it thicker. I'm sorry but the store does not carry rectangular washers.

Let me call on our experienced member @Noyade for his thoughts on these parts.

If you need further assistance, please let us know.

Eric

477bus

Thanks Eric, you’ve helped me before. It was an Italian company not German and that was all I could get out of them after my stand arrived with parts missing.
I’ll try your suggestions as the cost of buying parts from Italy is more than a whole stand. Cheers.

477bus

you wouldn’t believe it.

Picked up the new bolt from Bunnings then found out the bolt length would need to be 50 to 60 mm. Luckily, the bolt from my old stand fit perfectly. The Italian company had told me a complete load of nonsense.
But thanks for your help, as always informative and prompt!

EricL

Hello @477bus

I'm glad you got it sorted out.

If you need further assistance, please let us know.

Eric

Noyade

Too late. Glad you got it sorted!

Any chance of seeing the final assembly on the bike @477bus ?

Cheers.

477bus

double foot stand. The bolt goes through the rectangular mounting plate then open-air until it screws 20-25mm into the actual stand.
So, new stand with old bolt and plate.

Noyade

Thank you!

Better looking than mine. I bought a $6 dollar kick-stand from Kmart. It kept moving about so I 'hammered' the top plate into a Sine Wave shape. Welded a nut onto the the lower section and inserted the bolt like yours.

Cheers! Happy cycling!

Noyade

Assembled…