Australian designed (with some modifications), Australian built. Circa 1955. Two HP motor, 12" blade and twin belt.
Keep your fingers away....
What a lovely bit of old gear!
They new how to make them in those days..built like brick s...house and built to last a 100 years!! 😁
@Noyade fantastic bit of kit, is it yours? Could you share anymore details like where it came from or how it is still in operation, was it restored/ maintained, how does it compare to current saws on the market. Very interesting indeed!
G'day Mitchell.
Yes, it belonged to my father who was a builder and he was still using it in his 70's but by then he was more reliant on his German ELU saws.
I have the original pamphlet (somewhere) describing all its virtues and capabilities but essentially it was a framing saw that rested on the floor of the house being constructed. This explains why there was even a table saw kit that attached to it once the blade/motor was swung 180 degrees. But dad built a frame for it so that it was at a more workable height. I suppose it is similar in a way to a radial arm saw.
I made it mobile and replaced the bench wood.
But it is very heavy and I believe modern day sliding compound mitre saws would outperform it.
Nevertheless it is extremely nostalgic to occasionally fire it up! 😁
Cheers.
Graeme.
@Noyade Awesome, some of my grandfather's tools are my most prized possessions. No doubt they would be out preformed by modern day equivalents, but you certainly can't put a price on the nostalgia.
Great to hear about its history, I hope to see on Workshop any projects you build with it. Thanks!
Well say what you will about the old RAS yes they were good at removing arms and legs BUT they did a job that cannot be matched now. They were heavy and to a degree dangerous BUT they were reliable and built STRONG for generations. Houses are not built like 1950s anymore so the lightweight chukemin the bin things are a better class of throwaway for 2020s thinking.. We have a Mitchell Multimaster 240VAC 12' here and it is solid. I worry I will ever get a table strong enough.for the weight / rigidity. = not designed to be nicked by the builders down the road ! .Unless they have a crane !
Thanks for joining in the discussion @Timberme. Sounds like you have plenty of knowledge and experience to share with the Bunnings Workshop community so we are looking forward to reading more of your posts soon.
Please don't hesitate to post anytime you have something to share with the community or need a hand with a project around the house and garden.
Welcome,
Jason
Not really your home handiman type - more like an aero maintenance tech with not much to do with his spare time, with too many trucks and bikes and cars to work on in hot WX !
Currently setting up the sheds for a decent set of workshops.and getting to know my new mate = a Bluey with a Kelpie coat. So far he enjoys a good sleep where he can sense I am nearby, that is when he is not hooking into the chooks.!
One thing that gives me the impression that general professionalism has fallen away in some "servise sectors" since my childhood in the early "50's has to do with apparent modern construction norms such as keeping acquisition costs down and make up differences through maintenance costings contracts earned through salesmanship. One new commercial site I was employed in required almost 359 support clips added to the wiring loom (on one floor only ) simply to meet ABS !!!! = paid for by the building owner.!!!!
Great, thanks @Timberme. Sounds like your new mate would be a great candidate for adding to this popular thread - Show off your pet
M8 it is like this, when the knees hurt it is time to wish for fewer projects - just dealing with the weeds after rain is enough to make the washing up look attractive !!!! - stumbled upon a laod of USA stuff on internret = pretty good stuff too on all sorts of techniques and gear, a lot aimed at flogging product but still good info even if they sometimes outright contradict. The great thing about some is that you can look up product type OR project type OR presenters and etcc....
Hi @Noyade, I received this piece of nostalgia from my father in law after he retired. It was neglected with almost all the bolts rusted so it sat in my shed for a while until I decided to refurb it. Since I was going to keep it I brightened it up a little and color changed it to Monday red, I found it more pleasing to the eye every time I enter my garage.
Welcome to the Bunnings Workshop community @Rob241. It's a pleasure to have you join us, and what a spectacular first post!
I absolutely love your restoration and applaud you for spending the time on this machine. You've done a fantastic job, and I'm envious of the finish level you've achieved. Did the refurb require a complete disassembly?
We look forward to seeing what you'll contribute to the community as you are obviously very experienced around the shed. Please let us know if you ever need assistance or would like to share one of your projects with us.
Mitchell
@Rob241
Simply marvelous work Rob - brings a tear to my eye! 👍
Hello karl Hellsten. expression of interest in the sawmaster. Please private message if this item is for sale
Hi Karl (@50),
Welcome to the Bunnings Workshop community, it is fantastic to have you with us.
I have just removed your mobile number from your post as we don't allow sharing of private information in public posts.
If you get in touch with someone via private message, please feel free to share this information, but in a public post, it is best to leave it out.
Jacob
