-
Workbench cabinets for organising tools
These custom timber storage units hold organisers for fasteners, fixings and small tool parts. The project I have been using plastic containers for small parts in my workshop. After years of use, they are now falling apart and spreading their contents all over the place. While remodelling the workshop, I decided to change…
-
Custom tool holders on French cleat wall
This collection of custom holders utilises scrap timber to organise tools. The project I have been re-modelling my work space and decided to go with a French cleat wall for my tools. I am happy with this drill station. I used 90mm PVC, which was ok. I would opt for something a little thicker next time. My favourites are…
-
Cabinets for workshop/garage
For many many years, I have been using plastic containers for small parts etc. After years of use these are now falling apart and spreading their contents all over the place. I have been remodelling the shed/workshop lately and decided to change over to OCD containers. The containers I chose were Tactix 405mm and 380mm…
-
Ryobi tool holders for French cleat wall
I have been re-modelling my work space in the last couple of weeks, and decided to go with a French Cleat wall for my tools. Please note that this is a work-in-progress at the moment and not completed. I am happy with the Drill Station, using 90mm PVC is ok, but would opt for something a little thicker walled next time. My…
-
Wooden wheelbarrow for pot plants
A small decorative wooden wheelbarrow for the garden. Simple design and easily made out of 8 fence palings. (100x1800mm treated pine). Not sure if it should be painted, stained or coated with clear. Handles are 1200mm long, and the barrow is 300x600mm to give you an idea of size. The wheel is 6x 100x300 pieces glued and…
-
Roof for Native Bee Hive
Built some roofs for my partners Native Bee Hives. Simple project with design worked out from viewing images on Google. This roof was made from 3 x 1.5m X 100mm Treated Pine Fence Palings. The roof is 475mm long with the ends made from the same palings cut down the middle and shaped and cut to size. Cost about $6 per roof…
