-
Stacked stone cladding for brick fireplace
Stacked stone cladding, a floating mantel and attractive downlights gave this fireplace area a fresh, contemporary look. The project This all came together quite well. I built a floating mantel and added some lights with a trim above to blend in with the existing crown moulding. I also lightly sanded the clay tile base and…
-
Built in BBQ requirements and considerations
Hello, I am looking to convert this space into an outdoor BBQ/entertainment area with a built in BBQ and an outdoor drinks fridge. No sink for the moment, but might think of adding one later if necessary. The components I picked - BBQ - https://www.bunnings.com.au/matador-palladium-4-burner-built-in-bbq_p0173254 Fridge…
-
D.I.Y. console table
A hallway table featuring angled legs that can be easy to create when broken down into small steps. The project I built this console table that can be easily adjusted to suit whatever space you are working with. The utility panel I used for this piece is 1200 x 300. The base is straightforward once you break it down. I…
-
DIY console/hall table
Hello, Just sharing a project I did over the weekend. It can be easily adjusted to suit whatever space you are looking at. The utility panel I used for this piece is 1200x300. Some build photos 🙂
-
Cladding fireplace with stack stone
Hello, I'm looking to clad an open brick fireplace with stack stone. I was thinking of attaching cement sheets to the front and sides to give the stone a flat smooth surface to attach on to. Does this seem like a reasonable way to go about this? Cement sheet - https://www.bunnings.com.au/james-ha...62sqm_p0715374 Adhesive…
