-
How to clean slate floors?
I have uneven slate tiles all over my kitchen and lounge spaces. Couple of questions 1. What is a good way to clean these on a regular basis? The moping cloth of the bissel triangular headed steam mop keeps coming off as it hits the rough edges of the slate tiles. Some used an old fashioned mop? which ones? 2. Has anyone…
-
How to fix a cavity door draught?
How do I fix the draught on the trailing edge of cavity door(white)?See attached pic
-
How to fill gap around rangehood and ceiling?
Had my rangehood fitted. How do i fill the gap between the rangehood and ceiling? I cant put a small timber piece and there is the cornice. any ideas? Can i use cornice cement to seal the whole area?
-
How to fix a door that doesnt close and latch?
This door doesn’t close and latch properly. Can’t hear the usual click and often the door opens. Do I replace the whole latch or is there a structural issue ?
-
How to plaster and patch kitchen ceiling roof cavity?
Started my kitchen renovation, removed existing cabinets , found a section of the ceiling with some exposure to the roof . I want to patch this ( ceiling and side wall ) up before installing new cabinets . How do I do this , haven’t done any thing like this before , so seeking guidance . There is a level difference between…
-
How to replace Masport lawn mower blade?
Seeking help to see where I could get a replacement for masport 490 mower blade fitting which has come off. Should I replace the whole cover or only the nuts that hold it ? Not sure about the part name 😊. See attached pics .
-
How to install a peg board without drilling?
I would like to install a peg board in my tin shed without drilling any holes in the frames. I have been thinking out building a standalone wooden frame and screwing the peg board on to that wooden frame. Any one do something like this or any ideas?
-
How to remove graffiti from brick?
How do I remove this graffiti from my outside painted brick fence
-
How to fix cracked concrete floor in shed?
My shed which is now waterproof( see my earlier thread) has a crack in the concrete floor. I am planning to put some carpet tiles but want to fix the crack. What are my options ? There is existing sealant but i think thats only at the top. See pictures.
