-
Finish on Mondella Maestro bathroom fittings?
Hello, Are the following items the same finishes from Maestro? Colour Brass Model Name Mondella Maestro Brass Swivel Bath Spout https://www.mondella.com.au/products/bath-tapware/0344151-maestro-bath-spout-swivel-brs Model Number MON1237 Colour Brushed Brass Finish Model Name Mondella Maestro Lever Handle Wall Top Assembly…
-
Can electrical wires be covered with wood instead of tracked into brick?
We are renovatiing an old unit. Need an sconce wall light. To do this wires need to be taken from nearby fitting along wall. The electrician tried to track through the brick wall but found it too difficult. Can the wires be taken across the wall and covered with small strip?
-
How to install new bath with rounded ends?
We sourced a fiberglass bath with rounded ends. It's not squared off like the baths available. It needs to go into an alcove in the bathroom. The tiler says he cannot install it. Is it because he cannot cut curved tiles to fit around the top?
-
How to choose replacement bathroom taps for a renovation?
Hi am renovating a bathroom, and wonder if I need to buy any specific taps and shower fitting to fit where the old ones were? I can just buy the same that is a shower fitting and separate tap similar to the those already there and a bath spout and tap fittings. Is there anything tricky I need to consider?
-
How to fill gap behind freestanding oven and backsplash?
The tiler added a board to put the backsplash tiles on the wall and left a large gap behind the stovetop. Any suggestions to cover the gap are welcome.
-
Can you cut an external door to fit?
We want to replace the front door in a 1930s Art Deco apartment ŵith a vintage leadlight door. Question: can door be cut down to fit the existing opening at all or does it need to be exactly the same measurements? We have 8050mm x 2020mm x 35mm currently. I guess the thickness is not able to be altered. New Example door in…
-
Can tracked electrical wiring be plastered over?
The wiring had to be altered for the kitchen re model and the old wall needed to have the plastering and brick carved out for the new wiring. Can the wiring be plastered over? What is needed some of the wires are Contained in a white flexible tubing some parts are not.
-
What is required to install Kabodle under-cabinet LED panel?
Kaboodle 12V 30W LED Driver And Distributor do I need this for the Kaboodle under Cabinet LED Panel if the electrician is wiring the light in?
