-
Moldable Glue - supplier of?
I have a use for a product called moldable glue, such as Sugru Moldable Glue & disappointed to see that Bunnings don't supply it. Does anyone know where I can get it, or something similar in Australia, particularly Western Australia? I want it to reinforce the connection points where fine wires are subject to movement,…
-
How to save a damaged Silver Princess tree?
I recently discovered our Silver Princess had split into two at one of its main branches. I had to cut the broken section off and since plants aren't my forte, I am wondering if I need to coat the split end with anything, or is it best left alone. I wish to avoid losing the rest of the tree as it is well established.
-
Steel shed corner converted into an Exercise Area
Panarama of the finished area Pic 5 Pivot Clamp (Re-created)Pic 6 "C" Channel example I have been asked about this project before so I thought I'd share details with the Workshop. This article is focussed on lining the walls more than on equipping the area. My home workshop is bigger than I need now that my projects are…
-
How do I remove scratches from aluminium framed door?
Our previous dog gouged deep scratches into our stacker doors out the back, trying to get in when we were out. Tough claws! (Did she use a file?). There are bits of aluminium sticking out at the ends of some scratches. Does anyone know how to get the surfaces smooth again without introducing more scratches! I would like to…
-
DIY but stay alive...
I have been a DIYer my whole, fairly long, life. Like many, I have not been aware of all the risks, and have recently developed airway complaints which have not been satisfactorily diagnosed by specialists (??). I don't want to put anyone off, but the following article is worth a read to ensure that we don't become too lax…
-
Adding wheels to my workshop benches to make life easier
Like most home D-I-Y-ers , space to me is a limited and precious resource. I have tried many workshop configurations over the years, but each limited me. I found that using the space and equipment in as as versatile a way as possible, is the answer. I abandoned the fixed bench-by-the-wall layout and now have 2 smaller,…
-
Any tips for using hot-melt glue?
I am hoping someone with more skill than I can tell me how to use this stuff successfully. I have had a hot-melt gun for decades but have always found that using gives me questionable results. When I use it, it is stringy, messy and the it rarely holds anything together. I only use to as a short-term, spot-tack to hold…
