Child Item

Best tips for spring cleaning

In December the social calendar starts to get busier, so I'm hoping to get some spring cleaning done this weekend.

The windows will be one of the first targets, but there's plenty of other jobs to be done.

I'm sure I'm not going to be the only one trying to clean up this weekend. What are your best tips for spring cleaning to make your chores as quick and easy as possible, and get your house looking great inside and out?

Thanks for sharing,

Jason

Find more posts tagged with

Cleaning

Decorating

Organising

Other

Comments

greygardener

Not a tip but a request. What's the best thing to use to clean roller blinds that have marks on them?

CathD

There are tips for window cleaning here - https://www.workshop.com.au/t5/Outdoor-Living/How-do-you-clean-your-windows/td-p/1050

Andy_Mann

https://www.workshop.bunnings.com.au/discussion/comment/2421#Comment_2421

@greygardener, I take it that you have marks that you can't remove, could they possibly be scuff marks on the colour finish, from use over time?

We have exposed aluminium from wear on ours, maybe yours are in an early stage of the finish being eroded, are the marks darkish grey?

I'd bet that it's the inevitable ravages of time, through wear & tear.

You can either accept it like we have done, or perhaps try repainting them, but I'm not sure which product you should use. 😳

greygardener

https://www.workshop.bunnings.com.au/discussion/comment/63516#Comment_63516

Sorry @Andy_Mann, I wasn't clear enough.

They are internal (Luxaflex) roller blinds like the picture below. The marks mainly come from bugs that get caught when you roll them up, although one of our bedrooms is also a little damp in winter and there's some mildew spots on it as well. I haven't had a go at them yet with anything except water as I don't want to mark them and make the problem worse.

Roller+Blinds+Living+Room.jpg

Andy_Mann

https://www.workshop.bunnings.com.au/discussion/comment/94285#Comment_94285

All good @greygardener, I found instructions on the UK Luxaflex site:

Luxaflex Cleaning Instructions

DIY method - The author is talking about Silhouettes, but the principle's the same.

For mould, I'd try hanging them outside in direct sunlight to kill the mould, hopefully you'll get away with only giving them a light brush, but go easy on the fabric. Gentle does it.

If the mould persists, & you feel that you may need to use a mould remover, be very careful, especially if it's near the roller, the blinds are only stuck on, & getting the roller too moist/wet, can cause the blinds to detach.

NOTE SILHOUETTE OWNERS

If you have mould on your Silhouettes, don't do what I did, I thought more is best, & saturated the fabric louvres. WRONG!!! The result was that the aluminium backing separated from the sheer louvres. It was completely ruined. 😔

Isobel

My tip would be to first go through your cupboards, wardrobes etc and donate items to charity that you haven't used for a while. Makes the cleaning process easier and is very satisfying.

Andy_Mann

My tip for this time of year is to clean the internals of your PCs &/or laptops, BUT it's essential to comply with anti-static procedures. A simple grounding strap is all that's required to prevent static killing sensitive components.

It's incredible how much dust can accumulate on heat sensitive components over time, which plays all kinds of random havoc on the computer performance, if the heat isn't dissipated.

Deadset cheap & easy to do, with the added bonus that it could save you from an expensive call to a computer tech.

AHoy

https://www.workshop.bunnings.com.au/discussion/comment/2450#Comment_2450

How do you get rid of the dust @Andy_Mann? Do you use one of those tiny vaccuums?

Andy_Mann

https://www.workshop.bunnings.com.au/discussion/comment/63526#Comment_63526

@AHoy, there are many approaches, all relatively cheap & easy, but anti-static protection is essential, here's an example:

Anti-static-Wrist-Strap

Procedure

Simply shutdown your computer, & unplug it from the powerpoint, then slip the elastic band of the Anti Static strap onto your wrist, & then attach the spring clip to a metal part of the computer case, NOT to metal parts of the electronic components.

The cheapest, simplest, repeatable, & my way to go clean the computer circuitboard, is to use a Cosmetics Brush. Their bristles are fine enough to get into the heatsink fins, which are the most important things to clean. The really important heatsinks often have an electric fan attached to them, & look like a very thick block metal, that've had very deep, fine & close slots cut into them, or they may look a miniature radiator from a car.

I don't recommend getting a micro vacuuming kit for your vacuum cleaner, instead use the blowing function if it has one.

There's the good old air compressor to blast the dust away, but if you have one, then a cheap alternative is to the use an Aerosol Duster.

Hope this helps.

Isobel

https://www.workshop.bunnings.com.au/discussion/comment/94289#Comment_94289

I thought this article was funny - I've done a mad dash around the house more than once when I've found out friends or family are popping around in 5 minutes and the house is a mess...

https://www.domain.com.au/living/how-to-fake-clean-your-house-in-15-minutes-20171025-gz82ar/

Hiding stuff in the dishwasher is always a winner. You can also hide stuff in your car if desperate!

MitchellM

https://www.workshop.bunnings.com.au/discussion/comment/113714#Comment_113714

Mold + Mildew- Scrub down the area with a minimum amount of hot soapy water to remove any excess build-up. These eraser pads can help get the ingrained mold out of painted walls etc https://www.bunnings.com.au/mr-clean-melamine-eraser-cleaning-pads-4-pack_p4460198 .
To a 500ml spray bottle add 2 teaspoons of clove oil, then fill the rest with water. Spray this mixture over the effected and surrounding area.
The clove oil kills mold spores and prevents it from returning.
Last time the real estate was around to do an inspection they asked how we keep the mold away un-like the previous tenants. They now recommend this mixture to other tenants with mold issues.
Apart from the fact that it works, the best thing is you don't need to breath in excess amounts of bleach based cleaners.

Child Item