I have been a handy man around my home for many years and I'm keen on carpentry, wood working and especially old furniture restoration. I want to learn, particularly the many tricks of the trade. Also, happy to help people out if they need a hand as well as share what I know.
G'day EricL, Thanks very much. Your response was most helpful and I also looked at both the URL's you attached.In your response, you say "Please keep ...
G'day Everyone, I have this small oval table (53cm wide at its widest point and 77cm tall) and it's solid timber. It has seen better days but I'd like ...
G’day Mike T, thanks for the feedback and you’re welcome. People like me who are jacks and Jill’s of all trades but masters of none are very fortunate ...
Hello Everyone!, I have a steel garden shed, 6m X 3m. Today, the left opening door (when looking front on) was caught in strong wind and the door was ...
Typically not, @BigFella1956. Unless there is a film of dirt or grease, sanding will remove contaminants from the surface. You could go over them with ...
Scroll saw with a rotary tool attachment would be good for you. The rotary attachment will allow you to do the fine engraving etc. The scroll saw will ...
Hi Chris (@BigFella1956),
What great questions which I trust many of our members will be interested in. You might like to check out the topics Begin ...
G’day Mike T, thanks for the feedback and you’re welcome. People like me who are jacks and Jill’s of all trades but masters of none are very fortunate ...
Hello Everyone!, I have a steel garden shed, 6m X 3m. Today, the left opening door (when looking front on) was caught in strong wind and the door was ...
G'day, this question relates to 2 pieces of old furniture I have as follows:
one is a 80 year old dining table that used to belong to my mother so it ...
r23on, thanks for the oil on AutoDesk - I will check it out.In the meantime, I thought I would share with you my improvised attempt at table saw dust ...