Hi all , thanks for the new suggestions. Yes @JDE you're right. Although it didn’t occur to me to change the whole thing. I ended up getting the pl ...
Hi all, thank you for your suggestions. I just wanted to check first to make sure that I have what you are suggesting. I’ve attached a pic but I hav ...
Dear Usedbloom, thank you for your reply. It sounds very encouraging! I had a look at the link you provided and the measurements they give seem to b ...
hello all. the popup plug in my bathroom vanity just snapped off something and wont work (ie stay down). Can I replace it, or will I need to get a plu ...
Thanks @Tyro, I appreciate your comments. I’m also intrigued by your suggestion about acid washes. There were parts of the table that I couldn’t get ...
Hello @Elle44 I suggest bringing your broken parts to the store and comparing them to the Kinetic 32mm Chrome Pop-Up Waste Cover in combination with ...
When you mentioned that it snapped off, was there a piece inside the base, or had the top just been pulled off @Elle44?
See that cylinder in the mid ...
Hi @Elle44 That is a superb table! No wonder you were hesitant to paint it! Like you I'm new to DIY but whatever you ended up doing, Congratulations ...
Hi @Elle44
Good to see that you have solved the problem re clamping table legs while gluing. If I can't clamp timber together, I usually use some supe ...
Irwin quick action clamps are a bit forgiving when spaning distances. Given the fit up doesn't look great and there is some damage repair being done I ...
Hi all , thanks for the new suggestions. Yes @JDE you're right. Although it didn’t occur to me to change the whole thing. I ended up getting the pl ...
hello all. the popup plug in my bathroom vanity just snapped off something and wont work (ie stay down). Can I replace it, or will I need to get a plu ...
Thanks @Tyro, I appreciate your comments. I’m also intrigued by your suggestion about acid washes. There were parts of the table that I couldn’t get ...
Hi Eric, I thought I should have included pics, sorry about that! As you can see the slide rail wont work as there’s a small indent shelf. But the E ...
Hi Noyade, yes that angle's not so beautiful! But it was tricky with the clamps as you say. I ended up doing the legs one by one, which has left one ...