Hi Mitchell, thanks for your reply! To avoid to have to do tiling, I bought a new non-Ikea freestanding vanity (plus a new matching stone top + basin ...
I am looking for tips and advice from someone who has done this before, whether as DIY or by hiring tradesmen. I am guessing this will need someone w ...
Hi Eric, please see attached images of the 3-way connection- one inlet and 2 outlets. The 3-way connector was supplied by the Sydney- based bidet dis ...
Had I been even more patient, used a lower torque setting on the drill, and not applied occasional force I could have had a cleaner hole on the outsid ...
Yay, it's done! For a 6mm pipe I decided to use an 8mm drill bit, which gave a perfect fit. 6mm would have been too small. QEP 8mm Diamond Tile Drill ...
Hello @alwynprashant
Welcome to the Bunnings Workshop community. It's marvellous to have you join us, and thank you for sharing your question about ...
Hi @bazzyboy
Thank you for the update on your choice of vanity. Before we take the road of cutting into the cabinet itself, have you considered put ...
Hi @bazzyboy,
It appears that the vanity could have been installed before tiling, which would be quite unfortunate. I can't imagine why that would b ...
Hello @mdashraf5
Welcome to the Bunnings Workshop community. Thank you for joining the discussion. If you've read the previous post it is better to ...
Hi @bazzyboy , modern homes normally have a pressure limiting valve fitted near the meter to limit pressure to 500kPa max, which is a requirement for ...
Hi Eric, please see attached images of the 3-way connection- one inlet and 2 outlets. The 3-way connector was supplied by the Sydney- based bidet dis ...
Had I been even more patient, used a lower torque setting on the drill, and not applied occasional force I could have had a cleaner hole on the outsid ...
Yay, it's done! For a 6mm pipe I decided to use an 8mm drill bit, which gave a perfect fit. 6mm would have been too small. QEP 8mm Diamond Tile Drill ...
Thanks so much, Mitchell! I have this homework to do this weekend. I am also considering buying the water pressure gauge from Bunnings to check wate ...