Fascinating to read the advice from @Walzz. Many thanks for sharing your knowledge and experience. Let me also add a couple of other electricians t ...

Hey @Ask_Itee, Few things it could be. 1. Over voltage. 2. Loose connection as in the center pin is pressed in to far and it's slightly arcing 3. Hig ...

Hi @Ask_Itee, I can't see any reason why the electricians would not have offered to rewire the circuit for you. It's the most likely method of resol ...

@Ask_Itee I spent a number of years working as an electrician (now retired), and I can't see how a rewire would make any difference. From your descr ...

@Ask_Itee Vibration can cause early failure of incandescent bulbs due to movement of the hot filament. LED bulbs are more or less immune from this pr ...

Hi @Ask_Itee, It's great to see that @Walzz has already contributed to the discussion. I'd be keen to hear what these three electricians have come up ...

Hi @Ask_Itee, It sounds like your needs could be met with a Brilliant Smart Intelliscanner Outdoor PIR Sensor and two 1200mm LED batten lights. Two ...

Indeed @MitchellMc That's how I calibrated my wind sensor on my 3D printed weather station. Bear in mind the wind vane is likely to have 12 or less ...