Thanks Mitchell, is this available in narrower strips, say 70mm, for a more shiplap effect?
What about Meranti? https://www.bunnings.com.au/porta-41x1 ...
We'd like to clad a portion of our ensuite with timber. A sauna effect would be ideal, but it won't be used as a proper sauna, but shoudl be suitable ...
I'm asking this to gauge if this is feasible / worth doing... We need a new sliding door, to replace the existing 1800 slider. The space available is ...
Thanks Dave, we're on a concrete slab so dipping shouldn't be a problem. Yes, I think a few screws will be sufficient, as the hearth and stove will be ...
Thanks Jacob, that's helpful. The oak was laid on a concrete slab, and glued down. Considering your reply, a few screws should be sufficient to hold t ...
We wish to install a fireplace on a Hearth in our living area. The Hearth will be tiled on a fibre cement sheet that will be fixed to the existing eng ...
Hi @geoffr,
The reality with outdoor areas is that moisture will always be present. It's certainly best to allow the area to fully dry; however, a s ...
Hello @geoffr,
It is difficult to estimate its longevity as it will be exposed to various weather conditions. But it would be safe to say that both ...
Hi @geoffr,
You could use mortar to fill the holes and smooth out the surface, improving the appearance. Alternatively, you might want to test using ...
Thanks Dave, we're on a concrete slab so dipping shouldn't be a problem. Yes, I think a few screws will be sufficient, as the hearth and stove will be ...
Thanks Jacob, that's helpful. The oak was laid on a concrete slab, and glued down. Considering your reply, a few screws should be sufficient to hold t ...
We wish to install a fireplace on a Hearth in our living area. The Hearth will be tiled on a fibre cement sheet that will be fixed to the existing eng ...
Ok thanks Mike. I have a silicon by FixTech "15" that claims adherence - used in the marine industry (recommended by a tile company). But I'm still un ...
