Thanks, @jac, for your quick responseMy council rules say this, so I think I am within the limit .
Is a permit required?
An unattached shed less than ...
I’m planning to build a 2.4m × 4m shed with a max height of 2.4m and a skillion roof. It will be fixed to a concrete slab. I originally planned to use ...
I’m helping a friend close up a door opening, but I’ve noticed the wall studs are 95mm wide instead of the usual standard sizes. Does anyone know wher ...
Thank you, @JacobZ and @EricL . Your guidance has been invaluable.
another question which timber grade would be right for this project . The walls w ...
Thanks, @EricL , Can I still use CAgroup 150mm x 30m x 500um Plascourse if the timber base is not on the edge of the concrete slab and on top (around ...
20cm from the sides and back will be very different as it is at an angle. I have attached a shape of the concrete slab that's already in place. The si ...
Hi @achintya88,
The simplest way to account for this small variation in thickness is to pack out a standard 90mm stud with some strips of 5mm Masoni ...
