I have 4x 1mm shims because I drilled a bracket too low for my floating shelf. Would the shim stack be better positioned away from the drill hole so i ...
Yes the bracket is obstructing the screw so badly it is impossible to fit the drill and only a small narrow screwdriver will fit. I also want to hang ...
Thank you for your reply, My concern is that if I create a hole of the same size, the screw won't grip as tightly once I put it in again (hence using ...
Thanks for your replyyes I can use a normal hand held screw driver to drive the screw in once the hole was pre-drilled. I could not use a screwdriver ...
Thanks so much for your reply Mitchell Just to clarify I mistakenly at first used a wall plug (I made an x on spots to use a wall plug and a circle o ...
I am drilling into a metal stud and noticed I've made two dents. Should I keep going? The hole is 10mm for a 4.5mm screw (I am aware that is too big ...
Thanks for your replyyes I can use a normal hand held screw driver to drive the screw in once the hole was pre-drilled. I could not use a screwdriver ...
