Thanks for your advice @Dave-1 , @AlanM52, @Nailbag , @EricL .
Here are photos of the wall. There is rust above the window, perhaps indicative of a ...
I have a window embedded in a single brick wall (no cavity) that looks exactly like the situation in this thread: How to add framing around window on ...
The battens are level, so I will keep them and save myself the work of replacing them. Thanks @Nailbag and @Dave-1, I appreciate your advice. This i ...
Hi @Dave-1 The masonite packers are loosely wedged; there's a nail running through the batten and the middle of the masonite packers, but the Packers ...
I am renovating a room that was built as an attachment on the back of my garage, probably as a DIY job in the '70s.
The plasterboard ceiling was att ...
Hi @Charley3,
It looks like @Nailbag has provided some excellent advice here. That small niche at the top of the window does need to be resolved, an ...
Hi @Charley3,
Putting aside the structural and install requirements and... if you are prepared to go with a room aircon (10A plug lead) you should b ...
Good Evening @Charley3
Yep Put two long screws through the timber batons, through the masonite and into the beams. I would predrill a pilot hole thr ...
They aren’t going anywhere @Charley3
The fact they are loose contributes to shrinkage of the timbers, but also means they aren’t actually doing anythi ...
Thanks for your advice @Dave-1 , @AlanM52, @Nailbag , @EricL .
Here are photos of the wall. There is rust above the window, perhaps indicative of a ...
I have a window embedded in a single brick wall (no cavity) that looks exactly like the situation in this thread: How to add framing around window on ...
The battens are level, so I will keep them and save myself the work of replacing them. Thanks @Nailbag and @Dave-1, I appreciate your advice. This i ...
Hi @Dave-1 The masonite packers are loosely wedged; there's a nail running through the batten and the middle of the masonite packers, but the Packers ...
I am renovating a room that was built as an attachment on the back of my garage, probably as a DIY job in the '70s.
The plasterboard ceiling was att ...