How to replace flywire at top of bathroom window?

Question

I have a small unit with a bathroom window that has a 75mm flywire section at the top of the window. It does not seem to have the normal flywire grooves and spline holding the flywire in place.

Any ideas on how to replace the flywire, please?

Kind regards

Mike

EricL · Answer

Hello @Mike_C

Thanks for posting those extra pictures of your bathroom window. If you have a look at the fifth and final picture you posted, you'll notice that the rubber pieces holding the flywire in place have deteriorated. I believe this is where you need to begin your investigation with its assembly.

I propose looking behind the rubber gasket at the top and see if the flywire is held in place by double sided tape or silicone. This will be your starting point and from there you'll be able to determine how the rest of the flywire is fixed in place.

I strongly suggest having a quick look at this discussion - How can I fix this odd fly wire set up on toilet window? by @mich1972. It's an excellent example of how to put new flywire on your bathroom window.

Please keep us updated with your progress, we look forward to seeing new flywire installed in your window.

Eric

Mike_C · Answer

Hello All

Pictures below. Hopefully you can zoom in and have a look at jhow the flywire is fitted to the window.

(And yes I know the lintels need rust stabilising and repainting - one of the other jobs to do).

InsideInside
InsideOutside - binding seems to be plastic rather than rubber
Outside

Mike_C · Answer

Hello

Thanks a lot to those who replied. House is down south so will take photos next time I am down and post them for more advice.

Cheers

MIke