Child Item

How to remove window metal?

Hi I have a piece of metal that runs along the width of a window that I need to remove. It appears it is only held in place by 2 screws at each end, otherwise I think the piece of metal just sits flush against the window frame. The screws are in channels - see picture. What’s the best way of removing this? Was thinking a multi tool could be used to cut through the screw? Any advice ?

Find more posts tagged with

Tools and Materials

Repairing

Doors and Windows

Comments

EricL

Hello @AP3

Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about your window.

A multi tool is a very handy tool especially for tight inaccessible spaces. If the screw is in an inaccessible spot and you will no longer need it to be reattached, then cutting the screw with the multi tool is the way to go. However, if reinstallation is in the cards, then I suggest further investigation and see if removing parts of your window frame will allow you to access the screw for removal.

Let me call on our experienced members @Noyade, @Dave-1 and @Nailbag for their recommendations.

If you have any other questions we can help with, please let us know.

Eric

AP3

https://www.workshop.bunnings.com.au/discussion/comment/54600#Comment_54600

Thank you! Thats right I don’t need anything to be reattached, just removed. So I’ll grab a multi tool - any recommendations? Thanks very much

Dave-1

https://www.workshop.bunnings.com.au/discussion/comment/89555#Comment_89555

Good Evening @AP3

I am wondering what the other ends of the screws are like? Is there any chance of removing them over cutting them off? A multitool is still going to leave a mark on the piece you remove plus its next to a window as you say, vibrations around glass I would hesitate and leave to the last option type deal.

Dave

EricL

https://www.workshop.bunnings.com.au/discussion/comment/89555#Comment_89555

Hello @AP3

If you have any of the popular tools such as Ryobi, Ozito or AEG and Stanley it would be practical to get a tool that you already have as you already access to its power source. For example, if you had a Ryobi set you can just purchase the Ryobi 18V ONE+ Multi Tool - Tool Only and use the Ryobi One+ battery on it. If you don't have any of the tools mentioned, I leave the choice up to you to choose from the brands I've mentioned. They often come with a default cutting blade for wood and steel, but if you want a good blade choose from the Kango or Diablo range.

@Dave-1 raises a good point in regards to safety. Please remember that if you are working near glass to be extremely careful as it might shatter due to vibration and cause injury. Please make sure you are wearing personal protection such as gloves, goggles and a mask. If possible, please cover the glass with a towel to reduce any vibration that may travel around it.

If you need further assistance, please let us know.

Eric

AP3

https://www.workshop.bunnings.com.au/discussion/comment/110584#Comment_110584

Thanks Dave

the other ends are in the timber frame I presume they are headless because it screws into the actual framing around the window. The metal channel the screws are visible in is very difficult to manoeuvre around, unless there is bashing and brute force but as you say the window is right there.. so that isn’t a real option. Ive tried jamming a flat head screw driver in and using mallet to see if the metal lip moves but it didn’t budge. Would padding the glass area that close to the screws with towels etc make a difference to minimise vibration from the tool? I’ve not used a multi tool before

AP3

https://www.workshop.bunnings.com.au/discussion/comment/110585#Comment_110585

Thank you Eric 👍

Nailbag

Hi @AP3

Yep spot on using the multitool, but you will need a decent metal cutting blade, which aren't cheap. But this Diablo one I can vouch for, but in the long run is better value for money due to longevity over many others I have burnt through litterally.

Run the tool at around 3/4 speed so not to heat it up to much and don't apply to much pressure and it will cut through relatively easy.

Nailbag

AP3

https://www.workshop.bunnings.com.au/discussion/comment/54607#Comment_54607

Awesome thank you very much

Dave-1

https://www.workshop.bunnings.com.au/discussion/comment/89563#Comment_89563

Morning @AP3

Padding wont help a lot, cant hurt but the very nature of the vibrating tool is to vibrate 🙂 Id take it easy as @Nailbag has suggested and also use a decent cuttting blade.

Dave

Noyade

"Let me call on our experienced members @Noyade,"

Unfortunately Eric @EricL my life is littered with poor tool choices.

Example - when Kmart decided to rid itself of hardware and tools they started selling boxed multi-tool sets for $5 each on clearance.

Thinking a bargain was to be had and I would never need to buy blades again - I bought 6 boxes.

The tool was good - the blades were rubbish. Cleverly, Kmart made the blade attachment fitting only for their blades.

Live and learn as they say - I still gotta lotta learning to do.

I'm with @Nailbag - the blade choice is significant.

Cheers.

(PS - if you want a box- let me know. 😁)

AP3

https://www.workshop.bunnings.com.au/discussion/comment/54621#Comment_54621

@Noyade @Dave-1 @Nailbag @EricL

Thank you for all your advice. I bought an average tool but quality blade you recommended and it cut like butter! Well it was very smooth and incident free given proximity to glass.

Thanks again

EricL

https://www.workshop.bunnings.com.au/discussion/comment/89663#Comment_89663

Hello @AP3

That's great to hear, I'm glad you got the fitting off safely and without incident.

If you need further assistance, please let us know.

Eric

Nailbag

https://www.workshop.bunnings.com.au/discussion/comment/89663#Comment_89663

Thats excellent @AP3

I have always said a sharp blade in a basic saw will cut better than a dull one in a top of the range model. Good quality accessories are always a good investment. Last longer, do a better job with less effort.

Nailbag

Child Item