Hello, i am planning to renovate my very original bathroom. I have hired waterproofer who is tiler as well and plumber too for my project. I live in a strata unit on the 1ST FLOOR and my building was built in 1973.
my current bathroom has bathtub which i am wanting to get rid off and go with walk in shower. My concern is regarding the water pooling . My plumber and tiler are playing football game with me when i went to ask them to make sure that they get the bathroom shower slope correct. They both are in business for over 20 years, they know what they are doing , but still here i am. So i have uploaded pictures of my bath tub where the shower drain is . I have also uploaded second picture where the main drain is in the center of the bathroom . I can see venity waste is also going in there.
I am wanting to put the duel rain hand held shower .
so at the moment , bathtub is working as slope but when the bath tub is gone the shower slope has to be correct. My question is how to achieve this ? One plumber tell me he cant say at the moment as the bath tub needs to come out first and he would need to see whats underneath which sounds correct to me. But i need to get the scope of work approved by strata first.
Say if the drainage from bath tub to main center drainage pipe is in concrete slab and its not possible to cut the slab , my only option is to with screeding the shower area .
is my understanding correct ?
During the rough in phase, what can plumber do to so that water does not pool ? May be there would already be some screeding there on which bath tub is sitting .
Is there possibility of linear drain going in there ?
i am lost . I have sacrified my holidays to save up for my bathroom renovation.
And the last thing i want is for water not to drain and just stay on the surface when i use shower. My bathroom measures 2.13*2.01. My bath measures 1470 mm lenghts wide 760 mm. One additional thing to note is that my bathroom floor is raised about 10 mm from my hallway.
please help me out
Thank you all,