-
TV cabinet using Merbau decking boards
Plywood and Merbau decking were used to build an entertainment cabinet from scratch. The project Here is our TV cabinet that I built. It is made from using Merbau decking and 18mm Ply. It's 2000mm long, 500mm deep and 730mm high. I even made the legs, by gluing a few pieces together to make it solid. The top is two pieces…
-
Mobile workbench and storage
Thought I would put this up. Here is a mobile workbench I built for the garage. It's 1840mm long X 660mm wide and 860mm high. It's made all out of 18mm ply, with 17mm formply as the top, for glue ups and easy to clean. It has a mdf torsion top to keep it flat and level. The draws a shallow for sitting my regular used…
-
TV cabinet using Merbau decking boards
Here is our tv cabinet that I built. It is made from using merbau decking and 18mm ply. It 2000mm long, 500mm deep and 730mm high. I even made the legs by gluing a few pieces together, to make it solid. The top is 2 pieces of 18mm ply glued together. It's all been put together with some pocket hole screws. As an added…
-
Mitre saw workbench with storage
A workbench with built-in mitre (drop) saw, dust collector and loads of storage including vertical drawers to hold paint cans. The project I built this workbench with plenty of storage. It's 3m long and 1.9 high and only took me two weeks to build it after work. All up it cost me around $600. The vertical drawers are to…
-
Sliding drop saw cabinet
Here is a build that I did in my garage. It is made mainly out of 18mm MDF. I have attached a before and after photo. The vertical draws are to hold 1lt paint/stain cans. It has plenty of storage.
-
Fish tank through the wall
Thought I would do something different. My son wanted a fish tank but I didnt want it to protrude to far in to the lounge room, so I decided to put it through the wall. That way I can view it from from the dinning room aswell as the lounge. Its just a 2 foot fish tank. Fish will have to wait for now.
