-
How to hang Christmas decorations without drilling into brick?
Hi I have Christmas decorations that I’ll be hanging up on my house but I don’t want to drill into my brick wall is there anything I can use that will work thank you
-
How to extend bistro blind?
Hi I have installed a cafe blind it’s 3000 w x 2400 h I need to get an extender to close the gap but I had a look on the website and I only saw they had extenders in 2400mm height but the extenders that came with the blind are 2100mm height can I still use the 2400mm height extenders
-
How to cut a paver?
hi I bought a few of these pavers but I need to cut one a bit shorter as it’ll have a bit too much overhang if I leave it as a whole, what is the best solution without trying to crack or break the paver
-
How to stop rain coming in my entertainment area?
Hi I was wondering if there was a way to block out the rain that gets through my entertainment area as when it rains puddles of water run down into my entertainment area which wets the furniture and I want to block that out too only problem I have is the posts that’s supporting the patio is on stirrups and I need to figure…
-
How to attach joist hanger?
I’m needing to put up 70 x 35 x 2.1 metre framed timber between posts but I need joist hangers to hold them in place what is the best solution for this size timber
-
How to remove a bolt screwed into timber too far?
I screwed a bolt a bit too far in the timber and I can’t grip it I want to chip into the wood around the bolt so I can get the bolt out what tool would be best and fast to get the job done?
-
Can porcelain tiles be used in a covered outdoor area?
I found these tiles in Bunnings a couple weeks ago and I’m wondering if I could use these in my outdoor entertainment area to use as bench tops? It says these ones aren’t made for outdoor use but my entertainment area is mostly enclosed and the placement of where I’ll be putting these tiles are in an enclosed spot
-
How to loosen a bolt head thats stuck?
I was putting up a bistro blind I screwed the bolts in but forgot to put one of the pull strings over and when I went to loosen the screw the bolt won’t come out as the socket or spinners won’t grip the head of the bolt as it’s been screwed just a little too far into the wood is there a way I can fix this so I can get…
